|
|
本帖最后由 focuscon 于 2009-10-4 09:16 编辑 3 E6 h3 u/ ]8 E9 b
9 o) k. s8 }7 C* S% r
转自： ExtendSim官方论坛) `* j/ ~- W j4 a8 c) {
Cleaner + Pump updated for FlowMac's time unit for a grade, typically 1 year.
+ @% ?+ r/ z% s9 l, }Cleaner w/o pump blocks upgraded for better functionallity.
3 e% z* K6 i% ~. K5 vOlder upgrades: ) f8 k- m! ^: G
-FRU block had an usererror message during InitSim - The Fibermizer block has a script to automatically replace it with the improved Fiber Recovery Units block. This replace function is automatic - when opening the dialog of the Fibermizer block. Please check the connection lines as they might not be ideally drawn! - Update values located in the tab:
+ G2 F- P* C, @4 z, \% j8 C1 }Pump data and Tracers tab - R+ S$ K5 N. U/ j2 e. Y+ B
in block:
2 B+ C/ W. X" k2 R6 tCelleco LC Cleaner + Pump - Blocks updated to handle FlowMac's automatic dimension change in the Licence block under Intisim. - Disc filter now as a signal function for on/off operation during a simulation, and later can be upgraded for rpm control.
: F! m6 m7 f3 q0 K9 h& }% y5 C- All obsolete blocks have been pulled out of Celleco.lix and moved to a new library: CELLECO-CANCEL.lix that can be found here as well. ; K6 _" l) C: z* B8 ]2 O- O0 c
-Tracer to follow Filler did not work in the Disc Filter block. Fixed 5/28/08
# T2 v1 G- |( R* U/ J) R-Stand-pipe block added to be used with Celleco cleaners for example. " D$ q5 R9 @* S2 {/ u# `4 n! u0 G
- Upgraded information regarding what do to in the Disc Filter when opening up an existing model containing the Disc Filter for the first time in ver 6.
8 Y% @/ u0 w3 f6 G- Fixed a display value error in the cleaners- did not interfere with any simulations, only a display value for Combi cleaners.
- {) p9 d) X5 u& p& f0 W- LC Cleaner now shows the flow per cleaner when simulating with a Current Installation.
* X F. E, x- z' {& t2 e3 N( x- New higher capacity for the RT-HP cleaners. If you have simulated with this cleaner already, re-select the model in the pop-up menu to get the new higher capacity per cleaner. ' `8 K( E/ W8 v# Y& P/ A
- DeltaTime bugs worked out and a tracer error in the disc filter. & Q. c; D$ X4 a: M( g* N, V* `6 ]. X
- All blocks are are now Fractions and KraftMac ready.
* q! {, m( Y$ j# `- Only 2 cleaner blocks: with and without pump. The block will simulate all types of cleaners: Forward, Reverse, Parallel Flow and Combi cleaners This Celleco.lix will only work together with the FlowMac application and Extend version 6 and 7. :-) bengt.eriksson@glv.com |
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有帐号？注册
x
|
发表于 2009-10-4 09:13:56
